Smart Focus Series
With just a few settings the new plasma cutting units of the Smart Focus series achieve excellent results in the cutting range from 1 to 100 mm. Even under challenging conditions highest cutting quality and speed are realized. Therefore, we use our proven cutting technologies for example Contour Cut for cutting mild steel. The optimized gas control units and torches protect the consumables, reduce the gas consumption, and the costs per cutting meter. As a further development of Contour Cut the new Silent Cut technology reduces the sound pressure level by up to 15 dB(A) during cutting.
Smart Focus 130
Technical Data
| Mains voltage* Cutting current Marking current Duty cycle Cutting range
Plasma gases |
3x 480 V, 60 Hz 35 – 130 A 10 – 50 A 100 % 40 mm |
| Plasma machine torch Quick change head |
PerCut 2000 PerCut 4000 |
| *Other voltages and frequencies on request. | |
Smart Focus 200
Technical Data
| Mains voltage* Cutting current Marking current Duty cycle Cutting range
Plasma gases |
3x 480 V, 60 z 60 mm |
| Plasma machine torch Quick change head |
PerCut 2000 PerCut 4000 |
| *Other voltages and frequencies on request. | |
Smart Focus 300
Technical Data
| Mains voltage* Cutting current Marking current Duty cycle Cutting range
Plasma gases |
3x 480 V, 60 Hz 35 – 300 A 10 – 50 A 100 % 80 mm |
| Plasma machine torch Quick change head |
PerCut 4000 PerCut 4000 |
| *Other voltages and frequencies on request. | |
Smart Focus 400
Technical Data
|
Mains voltage*
Plasma gases |
3x 480 V, 60 Hz 100 mm |
| Plasma machine torch Quick change head |
PerCut 4000 PerCut 4000 |
| *Other voltages and frequencies on request. | |
Want to get started?
Kjellberg presents: Smart Focus Plasma Cutter
Contour Cut Speed 3/8” (10 mm)
The Smart Focus product line
New silent cut technology
Smart Focus 200 - Cutting 10 mm mild steel
Steel grate cutting with plasma
Contour cut part
Precision Cut
Precision near laser quality cuts on S235 material
Precision near laser quality cuts
Precision near laser quality cuts
Smart Focus 200 with the controller
The Kjellberg Finsterwalde Plasma und Maschinen GmbH focusses on the manufacture and further development of plasma cutting technology. With the patent for FineFocus plasma cutting which had been developed in close cooperation with Manfred von Ardenne’s research institute since 1959 and which was filed in 1962, the company is the oldest manufacturer in the market.
You are invited to visit us at our premises in Finsterwalde in the East German state of Brandenburg and experience first-hand the world of plasma cutting in our new customer and application centre. We offer you diverse demonstrations and training courses with a number of different 2D and 3D guiding systems. A tour of our modern production plant completes the experience and you can find out all about Kjellberg Finsterwalde – the pioneers in plasma cutting.